SKF GREASE HIGH VISCOSITY FOR HIGH LOADS & TEMPERATURES LGHB 2/0.4
SKF LGHB 2 is a high-viscosity mineral oil based grease that uses the very latest calcium sulfonate complex thickener technology. Due to its specific composition, the product can withstand high temperatures and extreme stress and can therefore be used for a whole range of applications, especially in mining and in the metal and cement segments. This grease contains no additives and the (EP) high pressure properties are due to the soap structure.
• Excellent anti-oxidation and anti-corrosion properties
• Good EP performance in high load applications
• Withstands peak temperatures up to 200°C
Typical Applications:
• Steel-on-steel ball joint bearings
• Pulp and paper machines
• Asphalt vibrating screens
• Continuous casting machines
• Sealed spherical roller bearings with an operating temperature up to 150 °C
• Roller bearings in the steel industry
• Forklift mast rollers
SKF LGHB 2 Brochure
SKF LGHB 2 Safety Data Sheet
Technical data | |
Type | LGHB 2/0.4 |
Code DIN 51825 | KP2N-20 |
NLGI consistency class | 2 |
Thickener (soap type) | Calcium sulfonate complex |
Color | Brown |
Type of base oil | Mineral |
Operating temperature range | –20 to +150 °C |
Drop point DIN ISO 2176 | >220 °C |
Base oil viscosity | |
40°C, mm²/s | 400-450 |
100 °C, mm²/s | 26.5 |
Penetration DIN ISO 2137 | |
60 strokes, 10–¹ mm | 265-295 |
100 000 strokes, 10–1 mm | -20 to +50 (365 max.) |
Mechanical Stability | |
Roll stability, 72 hours at 100°C, 10-¹ mm | -20 to +50 decrease |
V2F test | 'M' |
Corrosion resistance | |
Emcor: – standard ISO 11007 | 0-0 |
Emcor: – water washout test | 0-0 |
Emcor: – test with salt water (100% seawater) | 0-0 |
Water resistant | |
DIN 51 807/1.3 hours at 90 °C | 1 max. |
Oil separation | |
DIN 51 817.7 days at 40 °C, static, % | 1-3 at 60°C |
Lubricity | |
R2F operational test B at 120°C | Good weathering at 140 °C |
Copper corrosion | |
DIN 51 811, 110 °C | 2 max. 150 °C |
Bearing ring life | |
R0F test L50 life at 10,000 rpm, hour | >1000 min. at 130°C |
EP performance | |
Wear test DIN 51350/5, 1 400 N, mm | 0.86 |
4-ball test, welding load DIN 51350/4 | 4 800N |
Fitting Rust | |
ASTM D4170 (mg) | 0 |
Packaging | 420ml cartridge |
Manufacturer | SKF |
---|