P203 GREASE PUMP 2L 24V + M-TIMER + LOW LEVEL CONTROL
Lincoln P203 Grease Pump 2 Liter 24V with Microprocessor Timer and Low Level Control
With the M08 microprocessor timer, the pause time of the pump can be set in hours. After the set pause time, the pump will run until a full lubrication cycle has been completed on the progressive distributor on which the cycle sensor is mounted. After this, the pump goes back into its pause time. The pump has a maximum running time of 5 minutes (monitoring time) within which the sensor must signal a detection. If this is not done within the monitoring time, the pump will stop and generate an error signal.
- Suitable for grease up to NLGI 2
- Equipped with 1 pump element K6 with an output of 2.8cc/min. Expandable to a maximum of 3 pump elements, see related products.
- Connection pump element 1/4"G
- Connection voltage 24VDC
- Connector including 10 meter cable
- Maximum pressure 350 bar
- Protection class IP65
- Temperature -25 to 75°C
We recommend using a pressure relief valve for each pump element. Click here for an overview of pressure relief valves.
See related products for a matching cycle sensor.
Lincoln Quicklub pump P203 | |
Model | P203_E-_2XL__-600-24-006F00N0-M08A |
Model (old) | P203- 2XL -1K6-24-2A6.15-M08 |
Reservoir contents | 2 Liter |
For lubricant | Bold to NLGI-2 class |
Low Level Control | Yes |
Reservoir type | Default / Closed |
Pump element(s) | 1 x K6 |
Connection voltage | 24V DC |
Electric connection(s) |
Left Side, Power Supply, Low Level Control & manual operation with illuminated push button Right side, Bayonet 4 pin for connecting sensor(s) of distributor(s) |
Connector | Bayonet 7/5 pin with 10 meter cable |
Timer | Yes |
Lincoln Reference | 644-41057-6 |
Manual (English) | 951-171-026-EN |
Manufacturer | Lincoln |
---|---|
Reservoir | 2 L |
Timer | Ja |
Voltage | 24 V |
Low level signal | Yes |